 PremiumCoat®
sustainable roofing and waterproofing system is one of the highest
quality roofing and waterproofing systems available. It is made of the
best raw materials to form a flexible, U.V. resistant elastomeric
compound and is fully reinforced with a tough nonwoven polyester fabric
which has been designed for roofing and flashing applications of all
types. PremiumCoat® is easy to apply, safe to work with and requires no
special equipment. When the system is properly installed, by a
certified applicator, a 10 year warranty is available for specific
roofing applications. The warranty can then be extended every 10 years
under a proper maintenance schedule.
Advantages & Benefits
Sustainable roofing system that saves expensive removal and disposal cost.
Ultraviolet and Infrared resistant for added durability.
High Albedo reduces heat and lowers energy costs.
Resistant to acid rain and chemical pollutants, which protect roof or wall from fallout damage.
Won’t spread flame over noncombustible surfaces.
100 % adhesion of system to substrate
Wide range of colors provides beautiful architectural finish.
Meets V.O.C. emissions regulations to eliminate facility downtime during application.
Nontoxic formulation is safe to install.
Easy application and cleanup.
No special equipment required to install.
10-year extendable warranty available for roofs, which means system never has to be torn off. |
Uses
Metal roof waterproofing and cooling
Parapet wall waterproofing
Low-sloped roof waterproofing
Flashing of all types
Concrete waterproofing
Plywood waterproofing
Deck waterproofing
Exterior wall waterproofing
|
Technical Data
| Product |
Reinforced Acrylic Elastomeric System |
| Shelf life and storage conditions |
18 months if unopened and stored between 40° F (4° C) & 90° F (32° C) |
| Density |
12.1 lb/gal |
| Application temperature |
min = 40° F (4° C) to 105° F (41° C) (Ambient) min =36° F (2° C) to 130° F (51° C) (Surface) |
| Drying time (Touch Dry) |
1-4 hours at 77° F (25° C) / 40% humidity |
| Full cure |
7 days |
| Total thickness |
40-45 mils |
| Peak Tensile strength of system |
(ASTM D-412) 2210 psi (15.24 mPa) |
| Elongation of cured system |
> 53% |
| Water vapor permeability |
(ASTM D-1653) (ASTM D-6083) 3-5 perms |
| Fungus resistance |
(ASTM-G21) No growth supported |
| Algae resistance |
(ASTM G-29) No growth supported |
| Flammability |
(ASTM E-108) Class A over noncombustible deck |
| Salt spray test |
(ASTM B-117) No effects noted |
| Percent solids |
66.9% |
| Low temperature flexibility |
(ASTM D-522) 180° flexibility; bend at -15° |
Wind Uplift Pressure Resistance
Protocol (PA 114) |
Concrete -6,098 psf (292 kPa)
Polyisocyanurate -1,189 psf (56.9 kPa)
Smooth surface BUR -2,261 psf (108.3 kPa)
Granule surface Cap sheet -1,753 psf (83.9 kPa) |
| Accelerated weathering |
(ASTM G-26) Meets PA 129 protocol for 3,600 hours. |
|
