FlexCoat Is a crack-bridging elastomeric coating for masonry.
Masonry, and in particular, stucco, is a major point of entry for water. FlexCoat crack-bridging elastomeric is carefully formulated to stay flexible to handle crack movement and provide a high-quality water seal at the same time. FlexCoat keeps the water out while allowing you the option of hundreds of colors to match your decor.

Application Guidelines

Surface Preparation - Power wash and clean all surfaces to be waterproofed.

Priming - Chalking surfaces must be primed with SureBond Primer. All other surfaces do not require priming.

Application - Apply FlexCoat by brush, roller or sprayer at a rate of 180 square feet per gallon. Allow 8 hours to dry before applying a second coat. At least two coats must be applied.

Coverage

SureBond Primer = 300 square feet per gallon.
FlexCoat = 1 coat... 180 square feet per gallon.
2 coats... 90 square feet per gallon.
3 coats... 60 square feet per gallon.

Questions? Call Hydro-Stop, Inc. or your Hydro-Stop representative.